How to Pair the Plantronics Voyager Legend Bluetooth Headset

First Time Pairing for the Voyager Legend Headset:

1) Turn the headset on. Slide the power switch to the ‘on’ position showing green.  The headsets LEDs will begin flashing red/blue. The Voyager Legend headset is now in pairing mode. If you don’t see the red/blue flashing LED, turn the headset off and repeat step 1.  If for a second time your Voyager Legend LED doesn’t flash red/blue, your headset may have already been paired. Skip to the below section labeled: To Pair Voyager Legend to a Different Phone or Re-Pair to the Same Phone

2) Turn on your phone’s Bluetooth feature. While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > General > Bluetooth > On
• Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devices

NOTE: Menus may vary by device

3) Select Voyager Legend. Select “PLT_Legend” on your phone as a found device.  If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.

4) Complete pairing process. Once your Plantronics Bluetooth pairing is complete, LEDs on the Voyager Legend will stop flashing red/blue and you will hear “pairing successful.” from the headset.

NOTE: To enable caller name announcement, allow access to your contacts if your phone prompts you.

Your phone should now be paired with the Plantronics Voyager Legend headset. Customers often ask us how to connect Plantronics Bluetooth headsets and with these instructions, you will be able to use your old headset with your new phone.

To Pair Voyager Legend to a Different Phone or Re-Pair to the Same Phone:

1) Turn the headset on. Slide the power switch to the ‘on’ position showing green.

2) Using voice commands. Tap the Voice button on your Voyager Legend and say “Pair mode,” or  Press and hold the Call button on your Voyager Legend until you hear “Pairing”

3) Turn on your phone’s Bluetooth feature. While the Voyager Legends LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > General > Bluetooth > On
• Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devices

NOTE: Menus may vary by device

4) Select Voyager Legend. Select “PLT_Legend” on your phone as a found device.  If your phone asks, enter four zeros (0000) for the passcode or simply accept the connection.

5) Complete pairing process. Once your Plantronics Bluetooth pairing is complete, LEDs on the Voyager Legend will stop flashing red/blue and you will hear “pairing successful.” from the headset.

NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you.

Your phone should now be paired with the Plantronics Voyager Legend headset and ready for use. Customers often ask us how to connect Plantronics Bluetooth headsets and with this guide, you will be up and going in a matter of minutes.

Popular Audio/Video Solutions:

Make sure to update your headset firmware.

Visit Poly Lens for the latest updates.