Go back How to subscribe or pair your Plantronics CS361N wireless headset to the charging base. Latest update: April 9, 2019 The CS361N wireless headset and charging base unit are originally subscribed or paired to each other. If your CS361N headset breaks or you loose it and a replacement headset is necessary, you will have to “re-subscribe” or “pair” the new CS361N headset to the base unit. This is a very simple process that takes less than 1 minute to pair and no tools are required. You will first need to purchase the replacement CS361N headset. (Part number 71778-10 to order). Please be aware that if you have the CS361N , you will need replacement headset model number 71778-10. The Subscription process is as follows: Step 1: Place your new CS361N headset in the charging cradle for at least 20 minutes to charge. Once charged, remove the headset. Step 2: Press the speaking volume up “+” button for 5 seconds until the power light flashes red on the front of the base. Step 3: Place the headset in the cradle and the power light will flash red for 2 seconds. You have 10 seconds to complete the next step. Step 4: Press either the “+” or “-” signs (headset speaker volume buttons) for 3 seconds. The headset talk indicator light will turn on (green) during pairing and then off indicating a successful pairing. Step 5: The last step is to unplug the AC power adapter for 5 seconds, then reconnect. You can do this by unplugging at the wall or the bottom of the base (as pictured). Complete: If pairing was successful, your CS361N wireless headset is now operational. If not, repeat the steps one more time or call a technician for assistance. Comments are closed.