How to Pair Jabra Stealth and Jabra Stealth UC Bluetooth wireless headsets to your mobile phone or tablet:

  • How to pair a Jabra Stealth with a Bluetooth mobile device:

    • To pair your Jabra Stealth with your smartphone, tablet, or other mobile device, follow these steps:
      • 1) Turn on the Bluetooth setting on your mobile device.
      • 2) Turn on your Jabra Stealth by sliding the On/off switch to the “on” position.
        How to pair Jabra Stealth UC
      • 3) To enter pairing mode, press and hold (3 seconds) the Answer/end button until the LED flashes blue. Pairing mode will be announced in the headset.
        How to pair Jabra Stealth UC
      • 4) To pair, go to the Bluetooth menu on your mobile device and select the Jabra Stealth from the list of available devices. Enter “0000” (four zeros) if you are asked for a PIN code.Note: If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device.

  • How to reset the Jabra Stealth:

    • When you reset your Jabra Stealth, the list of devices that have been paired with it is cleared. Follow these steps to reset:
      • 1) Turn on your Jabra Stealth by setting the On/off switch to the “on” position
      • 2) Simultaneously press and hold (10 seconds) the Answer/end button and the¬†Voice button until the LED indicator flashes white.
        How to pair Jabra Stealth UC
      • 3) The Jabra Stealth restarts and is ready to pair. Follow the voice-guided instructions to pair.
      • 4) Turn on Bluetooth on your smartphone and select Jabra Stealth. Enter “0000” (4 zeros) if you are asked for a PIN code.
  • Note: When your Jabra Stealth has been reset, you will need to re-pair it with your smartphone. For troubleshooting tips, see here.
    Remember to delete the previous pairing before you re-pair.

  • How to pair a Stealth with a mobile device using NFC?

    • To pair your Stealth with your smartphone, table, or other mobile device using NFC, follow these steps:
      • (1) Turn on NFC on your mobile device
      • (2) Turn on your Jabra Stealth by sliding the On/off switch to the “on” positionHow to pair Jabra Stealth UC
      • (3) To pair, locate the NFC zone on your Jabra Stealth and place it against the NFC zone on your mobile device. Enter “0000” (four zeros) if you are asked for a PIN code. Your mobile device may prompt you to accept the pairing.
        How to pair Jabra Stealth UC NFC
  • Note: If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here.
    Optionally, try using the Bluetooth Pairing Guide

 

To update the Jabra Stealth UC firmware, visit Jabra Direct.

For more info and to purchase the latest version, visit Jabra Stealth UC Bluetooth Headset