Go back How to subscribe or pair your Plantronics CS70/CS70N wireless headset to the charging base. Latest update: April 13, 2019 The CS70 and CS70N wireless headsets and charging base unit are originally subscribed or paired to each other. If your CS70 or CS70N headset breaks or you loose it and a replacement headset is necessary, you will have to “re-subscribe” or “pair” the new CS70 or CS70N headset to the base unit. This is a very simple process that takes only 2-3 minutes and no tools are required. The Subscription process is as follows: Step 1: Remove the CS70 or CS70N headset from the base / charging cradle. Step 2: On the back of the base unit, press and hold the microphone (talk) volume + button until the red power indicator light on the front of the base starts to blink. (Approximately 5 seconds). Now release the button. Step 3: Place your CS70 or CS70N into the charging cradle. The red Indicator Light will flash for 2 seconds. Now, press with + or – Volume Button on the headset for 3 seconds until the Headset Talk Light comes on.. Step 4: The last step is to unplug the AC power adapter for 5 seconds, then reconnect. You can do this by unplugging at the wall or the bottom of the CS70/CS70N base (as pictured). Comments are closed.