Did you know that Plantronics recommends that you change the voice tube on your headset about every 6 months? There is a screen at the end of the voice tube that can become plugged up over time. Once the voice tube starts gathering particles in the screen, you will be hard to hear. So when … Continued
1) A10 – Direct Cable – The A10 cable is one of many quick-disconnect cables that are needed to connect with the Plantronics H-Series headsets offered. It is always a good idea to call us with the make and model of your phone so we can determine which cable will work for you. 2) HL10 Handset … Continued
1) 66268-03 A10 Direct Cable – The A10 cable is what connects your headset to the phone you are using, which is crucial to be fully connected. However, depending on the type of phone you have, you may need a different cable, so always check with us, and we will let you know which one to … Continued
Below is our Top Five Headsets Direct Accessories for the Poly (formerly Plantronics) H series Quick Disconnect (QD) headsets. 1) 66268-03 A10 Direct Cable – The A10 direct connect cable is a cost effective way to connect H series headsets to certain telephones that have an RJ9 headset jack, such as Nortel, Mitel and NEC. … Continued
1) A10 Direct Cable (66268-03) – This cable is used for 75% of the applications for corded headsets. What this means is if you have done the compatibility check for your phone and model and this was recommended, it will plug into your headset jack. This will then hook with a quick disconnect to the corded … Continued
1) A10 Direct Cable (66268-03) – The A10 cable (66268-03) along with an “H-series” headset is the replacement for the discontinued Plantronics Polaris headsets. The A10 part numbers 66268-02 and 66268-03 are the same cable, these will typically say “A10-16” on the cable’s “Quick Disconnect” plug, which is the standard US version. The A10 cable … Continued
© 1996-2023 Headsets Direct | All Rights Reserved.