Registering CT12 remote with charging tower

To De-Register the security code.

1.) Remove the remote from the base. In the standby mode, press and hold DELETE and END for about 10 seconds until you hear a confirmation tone. "De-Register?" appears.

2.) Press the arrow up to select "Yes", then SELECT/CH. You will hear a confirmation tone, and "De-Registration Complete" appears.

TIPS...
* If you have not pressed any key for 30 seconds while in the de-registering operation, the phone returns to standby mode.

* If you receive an incoming call, page or charge the remote while in de-registering operation or press talk/flash or END the operation is canceled.


To Register the security code.

1.) Unplug the AC adapter. Do not replace the remote to the base.

2.) Press and hold PAGE on the base, while you plug in the AC adapter, hold page until the CHARGE/IN USE LED on the base flashes.

3.) Press TALK/FLASH. "Remote Registering" appears. When the registration operation is finished "Registration Complete" appears and the CHARGE/IN USE LED is no linger illuminated. You will hear a confirmation tone and the phone returns to standby.


TIPS...
* You must complete the registration operation within 30 seconds or the phone returns to the standby mode.

* During the registration operation, you cannot receive an incoming call, page or make a call.


 

HD4020 - Created 01/25/2006